Category Archives: 产品

射频前端  RF Front end   47

工作频率  1.3GHz

Working frequency: 1.3GHz

  • 适用于超导加速器低电平前端
    Suitable for low level front end of superconducting accelerator
  • 可实现上下频率转换
    Up and down frequency conversion can be realized
  • 可兼容CPCI VPX标准
    Compatible with CPCI VPX standard
  • 程控增益调节
    Program-controlled gain adjustment

IFCM4D1U-1300-4典型指标

型号
Part Number
工作频率
Frequency(MHz)
射频
RF
工作频率
Frequency(MHz)
中频
IF
典型增益
Gain (dB)
范围
典型增益
Gain (dB)
调节精度
输出功率
1dB compr.
(dBm)
通道隔离度
(dB)
本振输入需求
Lo
(dBm)
工作电压 Voltage(V)工作电流 Current max.(mA)
IFCM4D1U-1300-40 130040-5~150.510.080
80
07~9500
IFCM4D1U-1300-20 1300 20-5~150.510.0800 7~9 500
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized
49

上变频输出信号频谱曲线 Upper frequency output signal spectrum curve

50

下变频输出信号频谱曲线 Lower frequency output signal spectrum curve

48

环境温度 +25° C,

The environment temperature +25° C,

工作电压 +7.5V

Operating voltage + 7.5v

 

 

  • 4个下变频通道
    4 down-conversion channels
  • 1个上变频通道
    1 up-conversion channel
  • 极低的附加抖动恶化
    Extremely low additional jitter deteriorates
  • 支持不低于02°精度的采集
    Support of no less than 2 ° acquisition precision

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


P波段本振系统  P Band Lo Convertor   46

工作频率  162.5MHz

Working frequency: 162.5MHz

  • 适用于P波段超导加速器低电平前端
    Suitable for p-band superconducting accelerator low level front end
  • 集成Lo、RF、CLK频率转换与前端
    Integrate Lo, RF, CLK frequency conversion and front-end
  • 标准19英寸2U机箱
    Standard 19-inch 2U case
  • 供电电压 AC 220V
    Power supply voltage AC 220V

SMX P波段本振系统典型指标

"型号Part Number"典型工作频率Lo典型工作频率IF典型时钟频率
(MHz)
输出功率
(dBm)
输出通道
数量
时间抖动恶化jitter add.
10Hz-10MHz
功率稳定度
SDW6UW2-162162.525100152-8≤10fs≤0.02%
SDW6UW2-32532525100152-8≤10fs≤0.02%
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

  • 可定制本振、时钟频率
    Customizable local oscillator and clock frequency
  • 各频率信号相互锁相
    The frequency signals lock each other
  • 极低的附加抖动恶化
    Extremely low additional jitter deteriorates
  • 可定制多通道输出
    Customizable multichannel output
  • 集成RF前端功能
    Integrate RF front-end functionality

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


S、C、X波段本振系统  S/C/X Band Lo Convertor   40

工作频率  11.424GHz

Working frequency: 11.424GHz41

  • 适用于X波段直线加速器低电平前端
    Suitable for X – band linear accelerator low level front end42
  • 可实现Lo、RF、CLK频率转换
    Can achieve Lo, RF, CLK frequency conversion 41
  • 标准19英寸2U机箱
    Standard 19-inch 2U case
  • 供电电压 AC 220V
    Supply voltage AC 220V

SMX S C X波段本振系统典型指标

型号
Part Number
典型工作频率Lo典型工作频率IF典型时钟频率
(MHz)
输出功率
(dBm)
输出通道
数量
时间抖动恶化jitter add.
10Hz-10MHz
功率稳定度
SMX-S32829.5626.44105.76/238152-8≤3fs≤0.02%
SMX-C65685.5626.44105.76/238
152-8≤3fs≤0.02%
SMX-X1111397.5626.44105.76/238152-8≤3fs≤0.02%
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

 

43

输入RF信号抖动25.4fs Input RF signal jitter 25.4fs

44

生成Lo信号抖动28.4fs Generate Lo signal jitter 28.4fs

45

生成CLK信号抖动109fs Generate CLK signal jitter 109fs

 

 

 

 

 

 

  • 可定制本振、时钟频率
    Customizable local oscillator and clock frequency
  • 各频率信号相互锁相
    The frequency signals lock each other
  • 极低的附加抖动恶化
    Extremely low additional jitter deteriorates
  • 可定制多通道输出
    Customizable multichannel output

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


SFXH-X1 X波段相位转换器  X Band Phase convertor37

工作频率  11.424GHz

Working frequency: 11.424GHz

  • 适用于X波段直线加速器微波相位快速翻转
    Suitable for fast microwave phase reversal of x-band linear accelerator
  • 180°快速相位翻转
    180 ° phase fast flip
  • 标准19英寸1U机箱
    Standard 19-inch 1U case
  • 供电电压 AC 220V
    Power supply voltage AC 220V

SFXH-X1典型指标

"型号Part Number"工作频率Fl(GHz)工作频率Fh(GHz)插入损耗
Insertion loss(dB)
幅度精度
Amplitude precision(dB)
相位精度
phase precision
最大功率
The most powerful(dBm)
转换速度
Conversion speed(ns)
SFXH-S128402870≤5±0.1±1°23≤50
SFXH-C157005730≤6±0.1±1°23≤50
SFXH-X11140011450≤8±0.1±1°20≤50
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

38 39

 

 

 

 

 

 

 


STL-4 差分信号转换器  Trigger Convertor 70

  • 适用于触发信号TTL至LVDS转换
    Applicable to trigger signal TTL to LVDS conversion
  • 多通道
    The multichannel
  • 标准19英寸1U机箱
    Standard 19-inch 1U case
  • 供电电压 AC 220V
    Supply voltage AC 220V

 

STL-4差分信号转换器典型指标

输入接口输出接口
连接形式
The connection form
TTL幅度
TTL amplitude
最小脉宽
The minimum pulse width
连接形式
The connection form
接口定义
The interface definition
幅度
amplitude
抖动
jitter
BNC-F3.3/5V100nsHarlink
27211218000
硬件可调节配置3.3V差分信号<10ns
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

  • 4个独立通道
    4 independent channels
  • 高同步性
    High synchronicity
  • 前面板同步指示灯显示脉冲信号状态
    The front panel sync indicator displays the pulse signal status

SDPA22S-6 中继放大器33

SDPA 22s-6 relay amplifier

主要工作频率  2856GHz

Main operating frequency: 2856GHz

  • 适用于S波段直线加速器长距离信号中继放大
    It is suitable for long distance signal relay amplification of s-band linear accelerator
  • 定制多个通道
    Custom multiple channels
  • 增益可调节
    Gain adjustable
  • 标准19英寸2U机箱
    Standard 19-inch 2U case
  • 供电电压 AC 220V
    Supply voltage AC 220V

SDPA22S-6典型指标

"工作频率"放大方式增益调节范围功率显示精度通道数输入信号功率
2856MHz±200MHz线性1dB/10dB0.1dB6路3~10dBm 6路

SDPA22S-6典型指标

增益调节范围
高功率通道x3"
增益调节范围
低功率通道x3
功率调节范围
高功率通道x3
功率调节范围
低功率通道x3
通道隔离度
13~23dB(3路)3~13dB(3路)11~21dBm(3路)5~15dBm(3路)>70dB

SDPA22S-6 线性度参数

信号频率输入功率输出功率
2856-612
2856-513
2856-414.1
2856-315.1
2856-216
2856-117
2856018
2856119
2856219.9
2856320.8
2856421.7
2856522.6
2856623.4
2856724

 

  • 高线性度,各通道独立增益调节
  • 功率监测显示
35

高功率通道功率曲线 High power channel power curve

34

低功率通道功率曲线 Low power channel power curve


PPA-C02 脉冲放大器28

PPA-C02 pulse amplifier

  • 适用于脉冲信号放大调制
    Suitable for pulse signal amplification and modulation
  • 多通道
    The multichannel
  • 标准19英寸2U机箱
    Standard 19-inch 2U case
  • 供电电压 AC 220V
    Supply voltage AC 220V
输入信号输出信号
2856M476MTTL trigger2856M-pulse
3路
2856M-reflect
3路
476M-pulse
1路
476M-reflect
1路
10~12dBm10~12dBm0~5V13dBm反射监测功能15dBm反射监测功能
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

 

29 30 31

 

 

 

 

 

 

 

 

 

32

图中为频率合成系统搭配脉冲放大器阵列使用效果

The effect of frequency synthesis system with pulse amplifier array is shown in the figure

  • 多频放大,多通道
  • Multifrequency amplifier, multichannel
  • 脉冲顶部平坦度优于01dB
  • The top flatness of the pulse is better than 01dB
  • 上升沿时间最快可达50ns
  • The ascent time is up to 50ns at most
  • 可定制多通道输出
  • Customizable multichannel output

 

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details

 


S波段频率合成系统 

 S Band RF Generator   24

主要工作频率  2856GHz

Main operating frequency: 2856GHz

  • 适用于S波段直线加速器微波多种频率合成
    It is suitable for microwave synthesis of s-band linear accelerator
  • 定制多个频率相互锁相
    Customize multiple frequency interlocking phases
  • 精密控温装置
    Precision temperature control device
  • 标准19英寸3U机箱
    Standard 19-inch 3U case
  • 供电电压 AC 220V
    Power supply voltage AC 220V

SFS-S-C02典型指标

输入信号输出信号输出信号输出信号输出信号输出信号输出信号输出信号输出信号输出信号输出信号
476M476M功分449.56M476M79.3M79.3M105.78M26.44M2856M2829.56M相位测试476M
5~10dBm-1dBm11dBm13dBm10dBm22dBm11dBm-10dBm15dBm13dBm-1dBm
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

25 26 27

 

 

 

 

 

 

 

 

 

图中为频率合成系统搭配脉冲放大器阵列使用效果

The effect of frequency synthesis system with pulse amplifier array is shown in the figure

  • 基准信源可定制多频点,各频点相位锁定
    The reference source can be customized with multiple frequency points and each frequency point phase locked
  • 高稳定性
    High stability
  • 集成化设计,内置精确控温装置,半导体控温装置精度02℃
    Integrated design, with accurate temperature control device, semiconductor precision 02 ℃ temperature control device
  • 可定制多通道输出
    Customizable multichannel output

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


C波段基准信源系统

  C Band RF Generator   21 

主要工作频率  5712GHz

The main operating frequency is 5712GHz

  • 适用于C波段直线加速器微波基准信号源
    Suitable for C band linear accelerator microwave reference signal source
  • 抖动≤40fs
    Jitter acuities were 40 fs
  • 标准19英寸2U机箱
    Standard 19-inch 2U case
  • 供电电压 AC 220V<
    Supply voltage AC 220V

SFS-SC2典型指标

"型号Part Number"工作频率F1(GHz)工作频率F2(GHz)输出功率Pout(dBm)杂波Spurious (dB)谐波Harmonics(dB)时间抖动Jitter(fs)10Hz-10MHz稳定度Aging
SFS-SC2571279.33315≤-70≤-50≤40@5712M≤1E-8/year
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

相位噪声参数Phase noise parameter

22 23

 

 

 

 

 

 

 

  • 基准信源可定制多频点,各频点相位锁定
    The reference source can be customized with multiple frequency points and each frequency point phase locked
  • 高稳定性
    High stability
  • 优于宽频带信号源仪器的相位噪声特性与性价比
    Better than broadband signal source instrument phase noise characteristics and cost performance
  • 可定制多通道输出
    Customizable multichannel output

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


S波段基准信源系统 

 S Band RF Generator    20

主要工作频率  2856GHz

Main operating frequency: 2856GHz

  • 适用于S波段直线加速器微波基准信号源
    S band linear accelerator microwave reference signal source
  • 抖动≤40fs
    Jitter acuities were 40 fs
  • 标准19英寸2U机箱
    Jitter acuities were 40 fs
  • 供电电压 AC 220V
    Supply voltage AC 220V

SFS-2856D典型指标

"型号Part Number"工作频率F1(GHz)工作频率F2(GHz)输出功率Pout(dBm)杂波Spurious (dB)谐波Harmonics(dB)时间抖动Jitter(fs)10Hz-10MHz稳定度Aging
SFS-2856D285679.33315≤-70≤-50≤40@2856M≤1E-8/year
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

 

相位噪声参数Phase noise parameter

18 19

 

 

 

 

 

 

 

  • 基准信源可定制多频点,各频点相位锁定
    The reference source can be customized with multiple frequency points and each frequency point phase locked
  • 高稳定性
    High stability
  • 优于宽频带信号源仪器的相位噪声特性与性价比
    Better than broadband signal source instrument phase noise characteristics and cost performance
  • 可定制多通道输出
    Customizable multichannel output

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details