Category Archives: 产品

SXB系列69程控测试仪    

Program control tester

工作频率  13-23GHz

Operating frequency: 13-23ghz

  • 适用于通信系统MIMO信道场景模拟测量
    It is suitable for MIMO channel scene simulation measurement of communication system
  • 4×4通道独立调节
    4×4 channel independent regulation
  • 便携性
    portability
  • 支持LAN远程控制
    Support LAN remote control

参数性能Electrical Specification

参数 parameter典型值 Specification
输入频率范围 Frequency Range (GHz)13/15/18/23
输入功率范围 Power Handing(dBm)<35
信号输入带宽band width(MHz)>112M
插损 Insertion Loss (dB)31dB
驻波比VSWR1.3
可调衰减范围 Attenuation Range (dB)0~30
可调衰减步进 Attenuation Step(dB)1
可调衰减精度 Attenuation accuracy (dB)±0.5
移相范围 Phase Shift Range (°)0~360
移相步进 Phase Shift Step (°)5.6
移相器精度 Phase accuracy (°)±2.5
功分器隔离度Isolation(dB)36
时延 Time Delay between different path16条信道的时延差小于0.01ns
群延时Group Delay112M带内小于3ns
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized

规格特性Mechanical Specification

规格Description特性Specification
射频接口RF interface8*SMA-Female
尺寸Physical Size190mm*160mm*160mm
重量Weight2kg
电源Power interface市电接口Mains plug
功耗Power8W

说明 Notes

该产品为华为技术有限公司合作产品,此产品仅为华为技术有限公司提供

This product is a cooperative product of huawei technologies co., LTD. This product is only provide to huawei technologies co., LTD


8毫米收发系统65

Millimeterwave transceiver system    

工作频率  32.0~38.0 GHz

Working frequency: 32.0 ~ 38.0ghz

适用于托卡马克等离子体装置

Suitable for tokamak plasma device

  • 毫米波频段
    Millimeter wave band
  • 4频道信号采用相同通道同步工作
    Channel 4 signal USES the same channel to work synchronously
  • 多达128路独立的I/Q接收信号接口
    Up to 128 independent I/Q receiving signal interfaces
  • 接收信号幅度可单独调节
    The receiving signal amplitude can be adjusted separately
  • 标准19英寸机箱
    Standard 19-inch case

8毫米收发系统由一台发射单元、两台接收单元组成,各单元采用独立19英寸机箱,通过高频微波电缆连接,直接产生多个频率的毫米波发射信号,并同时将不同频率多个通道接收信号独立下变频至I/Q输出。

8 mm transceiver system by a transmission unit, two units, each unit adopts independent 19 inch case, through the high frequency microwave cable connection, directly produce multiple frequency millimeter wave signal, and at the same time, the different frequency multiple channel signals under the independent variable frequency to the I/Q output.

 

66 67

 

 

 

 

 

接收单元 Receiving unit

  • 每台接收机具备8个独立的通道
    Each receiver has eight separate channels
  • 每个通道微波接收端口独立,同步接收4频道信号
    Each channel microwave receiving port is independent and receives 4 channel signal synchronously
  • 各频道抗扰抑制:优于35dB。
    Channel interference rejection: better than 35dB.
  • I/Q信号视频带宽:500kHz
    Video bandwidth of I/Q signal: 500kHz
  • I/Q信号视频增益:0-20dB可调
    Video gain of I/Q signal: 0-20db tunable

发射单元  Launch unit

  • 四频道同步工作
    Channel 4 works synchronously
  • 工作频率覆盖:32.0~38.0GHz
    Working frequency coverage: 32.0 ~ 38.0ghz
  • 四频道独立选通开关,可单独工作
    4 channel independent selector switch, can work independently
  • 每个频点的功率调节动态范围:15dB
    Power adjustment dynamic range at each frequency point: 15dB
  • 发射微波相位噪声:优于-80dBc/Hz@10kHz
    Transmitting microwave phase noise: better than -80dbc/hz@10khz

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


61

C波段激励源系统

C Band RF driver system   

工作频率  3.7 GHz

Operating frequency: 3.7 GHz

  • 适用于托卡马克等离子体装置
    Suitable for tokamak plasma device
  • 连续波输出输出功率10W×8通道
    Continuous wave output power 10W x 8 channels
  • 各通道相位360°可调
    Each channel phase 360 ° is adjustable
  • 标准19英寸机箱
    Standard 19-inch case

 

3.7GHz微波激励源由频率源单元、现场控制器单元、功分器单元、功放单

元组成,各单元采用独立19英寸2U机箱,通过高频微波电缆和ST光纤连接。

3.7GHz microwave excitation source consists of frequency source unit, field controller unit, power divider unit and power amplifier unit

The unit is composed of 19 “2U chassis, connected by high frequency microwave cable and ST optical fiber.

63

远程开关响应曲线 Remote switching response curve

62

频谱曲线 Spectrum curve

 

 

 

 

 

  • 采用内部高精度基准源,输出频率精度优于5×10-8
    Using internal high precision reference source, the output frequency precision is better than 5 x 10-8
  • 输出频率具有高稳定性
    The output frequency is highly stable
  • 低相噪低杂散的输出信号
    Low phase noise low stray output signal
  • 输出功率最大可达连续波10W
    The maximum output power can reach 10W continuous wave
  • 宽线性区工作,可配合功率控制系统实现实时功率控制
    Wide linear zone can be used to realize real – time power control with power control system
  • 可在连续波模式工作,亦可通过外部触发信号在脉冲模式工作
    It can work in continuous wave mode, or it can work in pulse mode through external trigger signal
  • 输出功率具有高稳定性
    The output power is highly stable
  • 每路信号具备独立的数字式移相功能,可在0~360°调节,调节步长8°
    Every road signals have independent digital phase-shifting function, can be adjusted in 0 ~ 360 °, adjust step 8 ° 64
  • 64以太网通信远程控制功能
    Ethernet communication remote control function
  • 远程关断功能
    Remote shutdown function
  • 远程相位控制功能
    Remote phase control function
  • 现场功率控制功能
    Field power control function
  • 远程功率控制功能
    Remote power control function
  • 远程功率检测功能
    Remote power detection function
  • 远程工作状态监测功能
    Remote working status monitoring function

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

 Notes

This product is custom-designed. Please contact the manufacturer for details


SDAT-17-160

程控衰减器  Programmable attenuator   

工作频率  3-32GHz

Operating frequency: 3-32ghz

  • 适用于通信系统场景模拟测量
    Suitable for communication system scene simulation measurement
  • 宽带覆盖
    Broadband coverage
  • 高速连续衰减调节
    High speed continuous attenuation control
  • 支持LAN远程控制
    Support LAN remote control

SDAT-17-1参数性能

参数 parameter典型值 Specification
输入频率范围 Frequency Range (GHz)3~32
输入功率范围 Power Handing(dBm)<35
信号输入带宽band width(MHz)>112M
插损 Insertion Loss (dB)5dB typ.
驻波比VSWR1.5
可调衰减范围 Attenuation Range (dB)0~30
可调衰减步进 Attenuation Step(dB)0.1
可调衰减精度 Attenuation accuracy (dB)±0.1
衰减调节速率 Attenuation adjustment rate (dB/s)1~300①
通道数量 number of channels1
以上指标为典型值,此系列产品部分参数可定制

① 衰减调节速率在可编程环境下可依定需求灵活设定,衰减量在调节过程中为线性变化

The above indicators are typical values, and some parameters of this series of products can be customized
① The attenuation adjustment rate can be set flexibly according to the fixed demand in programmable environment, and the attenuation is a linear change in the adjustment process

SDAT-17-1规格特征

规格Description特性Specification
射频接口RF interface2*SMA-Female
尺寸Physical Size180mm*100mm*50mm
重量Weight1kg
电源Power interface市电接口Mains plug
功耗Power5W
说明 Notes
该产品为华为技术有限公司合作产品,详细细节请联系厂家

This product is a cooperative product of huawei technology co., LTD. Please contact the manufacturer for details

 


SDAT-459

程控衰减器  Programmable attenuator   

工作频率  X-band/Ku-band

  • 适用于通信系统场景模拟测量
    Suitable for communication system scene simulation measurement
  • 4个同步通道
    4 synchronous channels
  • 高速连续衰减调节
    High speed continuous attenuation control
  • 支持LAN远程控制
    Support LAN remote control

SDAT-4参数性能

参数 parameter典型值 Specification
输入频率范围 Frequency Range (GHz)12~14 ①
输入功率范围 Power Handing(dBm)<35
信号输入带宽band width(MHz)>112M
插损 Insertion Loss (dB)5dB typ.
驻波比VSWR1.5
可调衰减范围 Attenuation Range (dB)0~30
可调衰减步进 Attenuation Step(dB)0.1
可调衰减精度 Attenuation accuracy (dB)±0.1
衰减调节速率 Attenuation adjustment rate (dB/s)1~300②
通道数量 number of channels4③
以上指标为典型值,此系列产品部分参数可定制
① 衰减器可根据需求订制,SDAT系列产品可覆盖至最高40GHz更多工作频段
② 衰减调节速率在可编程环境下可依定需求灵活设定,衰减量在调节过程中为线性变化
③ 衰减器可根据需求选择不同通道数量版本

The above indicators are typical values, and some parameters of this series of products can be customized
①The SDAT series products can cover up to 40GHz more working frequencies
②The attenuation adjustment rate can be flexibly set in programmable environment according to the demand of certain information
③Depending on the requirements, the torque attenuator can select a different number of channel versions

SDAT-4规格特征

规格Description特性Specification
射频接口RF interface8*SMA-Female
尺寸Physical Size45mm*160mm*110mm
重量Weight1kg
电源Power interface市电接口Mains plug
功耗Power5W
说明 Notes
该产品为华为技术有限公司合作产品,详细细节请联系厂家
This product is a cooperative product of huawei technology co., LTD. Please contact the manufacturer for details


SDAT-P258

大功率程控衰减器  High power attenuator   

工作频率  2-6GHz

Operating frequency: 2-6GHz

  • 适用于加速器固放功率调节
    It is suitable for the solid power adjustment of accelerator
  • 可承载1.5kW峰值功率
    Capable of carrying 1.5kw peak power
  • 抗干扰
    anti-interference
  • 标准19英寸3U机箱
    Standard 19-inch 3U case

SDAT-P2典型指标

型号 model工作频率
Frequency(MHz)
最低
FL
工作频率
Frequency(MHz)
最高
FU
插入损耗 insertion loss
(dB)
功率调节范围 controlling power range
(dB)
功率调节精度power of regulation precision
(dB)
最大连续功率
continuous maximum rating
(W)
最大峰值功率 Maximum peak power
(W)
SDAT-P2200060001300.011001500@1%占空比( duty ratio)100us脉宽(pulse width)
说明 Notes
以上指标为典型值
The above indicators are typical values
  • 2组N型连接器,可提供2通道大功率信号功率调节
    2 sets of N connector, can provide 2 channel high power signal power adjustment
  • 支持LAN远程控制监测方式
    Support LAN remote control monitoring mode
  • 通过精密电机组件实现的机械功率调节功能,具有良好的抗干扰特性
    The mechanical power adjustment function realized by precise motor assembly has good anti-interference characteristics
  • 适用于辐照环境机房的远程功率调节方案
    It is suitable for remote power adjustment scheme of irradiation environment machine room
  • 支持01dB精度的实施功率连续调节功能
    Support 01dB precision to implement continuous power regulation function

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


XGD-6光电转换器

Photoelectric converter

56

  • 适用于同步脉冲信号的光传输转换
    Suitable for optical transmission and conversion of synchronous pulse signal
  • 极低的抖动误差和延迟
    Very low jitter error and delay
  • 宽适应范围
    Wide range of adaptation
  • 6通道光电转换
    6 channel photoelectric conversion
  • 标准19英寸1U机箱
    Standard 19-inch 1U case

    XGD-6典型指标

    型号光信号接口电信号接口适配光纤最大传输速率响应延时抖动误差功耗
    XGD-6STBNC62.5/125um160Mb100ns<1ns5W
    说明 Notes
    以上指标为典型值
    The above indicators are typical values
57

光-电转换 输出信号曲线 上升沿3ns下降沿3ns 幅度5V The output signal curve of photoelectric conversion goes up along 3ns and down along 3ns and 5V

 

 

 

 

 

 

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details

 


XGD-2光电/电光转换器

XGD-2 photoelectric/electro-optical converter51

  • 适用于同步脉冲信号的光传输转换
    Suitable for optical transmission and conversion of synchronous pulse signal
  • 极低的抖动误差和延迟
    Very low jitter error and delay
  • 宽适应范围
    Wide range of adaptation
  • 铝合金机壳
    Aluminum alloy casing

XGD-2典型指标

型号 model光信号接口
Optical signal interface
电信号接口
Electrical signal interface
适配光纤
Adaptive optical fiber
最大传输速率
Maximum transmission rate
响应延时
Response latency
抖动误差
Jitter error
功耗
Power consumption
XGD-2STBNC62.5/125um 160Mb100ns<1ns1W
说明 Notes
以上指标为典型值
The above indicators are typical values
53

电-光-电转换 响应延时曲线 响应延时31ns Response delay curve of electro – optical – electrical conversion response is 31ns

 

接口 Interface:

52

 

 

 

 

 

 

 

55

光-电转换 输出信号曲线 上升沿3ns下降沿3ns 幅度5V The output signal curve of photoelectric conversion goes up along 3ns and down along 3ns and 5V

54

 

 

 

 

 

 

 

 


IFCM4D1U-P25

射频前端  RF Front end   68

工作频率  P波段

Working frequency: P band

  • 适用于超导加速器低电平前端
  • 可实现上下频率转换
    Up and down frequency conversion can be realized
  • 可兼容CPCI或 VPX标准
    Compatible with CPCI or VPX standards
  • 程控增益调节
    Programmed gain adjustment
型号
Part Number
工作频率
Frequency(MHz)
射频
RF
工作频率
Frequency(MHz)
中频
IF
典型增益
Gain (dB)
范围
典型增益
Gain (dB)
调节精度
输出功率
1dB compr.
(dBm)
通道隔离度
(dB)
本振输入需求
Lo
(dBm)
工作电压 Voltage(V)工作电流 Current max.(mA)
IFCM4D1U-162-25

162.5
25-5~150.510.080
80
07~9500
IFCM4D1U-325-2532525-5~150.510.08007~9500
IFCM4D1U-650-2565025-5~150.510.08007~9500
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized
  • 4个下变频通道
  • 4 down-conversion channels
  • 1个上变频通道
  • 1 up-conversion channel
  • 极低的附加抖动恶化
  • Extremely low additional jitter deteriorates
  • 支持不低于02°精度的采集
  • Support of no less than 2 ° acquisition precision

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details


射频前端  RF Front end   47

工作频率  1.3GHz

Working frequency: 1.3GHz

  • 适用于超导加速器低电平前端
    Suitable for low level front end of superconducting accelerator
  • 可实现上下频率转换
    Up and down frequency conversion can be realized
  • 可兼容CPCI VPX标准
    Compatible with CPCI VPX standard
  • 程控增益调节
    Program-controlled gain adjustment

IFCM4D1U-1300-4典型指标

型号
Part Number
工作频率
Frequency(MHz)
射频
RF
工作频率
Frequency(MHz)
中频
IF
典型增益
Gain (dB)
范围
典型增益
Gain (dB)
调节精度
输出功率
1dB compr.
(dBm)
通道隔离度
(dB)
本振输入需求
Lo
(dBm)
工作电压 Voltage(V)工作电流 Current max.(mA)
IFCM4D1U-1300-40 130040-5~150.510.080
80
07~9500
IFCM4D1U-1300-20 1300 20-5~150.510.0800 7~9 500
说明 Notes
以上指标为典型值,此系列产品部分参数可定制
The above indicators are typical values, and some parameters of this series of products can be customized
49

上变频输出信号频谱曲线 Upper frequency output signal spectrum curve

50

下变频输出信号频谱曲线 Lower frequency output signal spectrum curve

48

环境温度 +25° C,

The environment temperature +25° C,

工作电压 +7.5V

Operating voltage + 7.5v

 

 

  • 4个下变频通道
    4 down-conversion channels
  • 1个上变频通道
    1 up-conversion channel
  • 极低的附加抖动恶化
    Extremely low additional jitter deteriorates
  • 支持不低于02°精度的采集
    Support of no less than 2 ° acquisition precision

说明 Notes

该产品为定制设计产品,详细细节请联系厂家

This product is custom-designed. Please contact the manufacturer for details